{ "elapsed_ms": 2479, "engine_route": "persistent_cadquery_unix_socket", "ok": true, "report": { "artifacts": { "file_stem": "Stage_3C_6_Cartoon_Dice_Tower", "preview": "/mnt/shirevault-network/SHiREVault/SHiREAcademy/FastBuilder/SystemTests/Stage3C6-DynamicEnvelopeCoreV3-20260729T085502Z/Cartoon/preview.svg", "preview_sha256": "180a5948074cb0f84e35cfc932dd1d5a9a227b4ed57e8ab61539e28a3011bf38", "requested_formats": [ "step", "stl" ], "step": "/mnt/shirevault-network/SHiREVault/SHiREAcademy/FastBuilder/SystemTests/Stage3C6-DynamicEnvelopeCoreV3-20260729T085502Z/Cartoon/Stage_3C_6_Cartoon_Dice_Tower.step", "step_sha256": "c7b0684b130f1e45707476f7a1e4eec30082992e389f32361c712f2b2a27ceeb", "stl": "/mnt/shirevault-network/SHiREVault/SHiREAcademy/FastBuilder/SystemTests/Stage3C6-DynamicEnvelopeCoreV3-20260729T085502Z/Cartoon/Stage_3C_6_Cartoon_Dice_Tower.stl", "stl_sha256": "dca9bb8b12a8a983b678c0e34eba511f5fa889e01e1236b13411a5643a053a7c" }, "builder_version": "0.8.0-stage3c.6-dynamic-dice-envelope-core-v3", "checks": { "all_tumble_ramps_wall_high_inner_low": true, "alternating_support_walls": true, "catch_overlap_safe": true, "controlled_roll_exit_path": true, "core_dice_tower_contract": true, "dedicated_exit_feeder_present": true, "dice_clearance_safe": true, "dimensions_match_spec": true, "drop_zone_safe": true, "dynamic_tumble_envelope_safe": true, "exit_chute_angle_safe": true, "exit_chute_barrier_free": true, "exit_chute_present": true, "exit_chute_width_safe": true, "final_ramp_aligned_to_exit": true, "fits_selected_printer": true, "flush_ramp_chute_transition": true, "height_feasibility_pass": true, "integrated_collection_tray": true, "internal_ramps_present": true, "legacy_core_v2_squeezed_layout_blocked": true, "minimum_inter_ramp_clearance_safe": true, "no_forge_ready_export": true, "one_valid_final_solid": true, "only_requested_formats_written": true, "positive_volume": true, "practice_state_not_used": true, "replacement_cascade_structure": true, "safe_wall_thickness": true, "step_written": true, "stl_written": true, "theme_layer_separate": true }, "classification": "FAST_BUILDER_DRAFT_PASS", "design_theme": "cartoon", "file_stem": "Stage_3C_6_Cartoon_Dice_Tower", "generated_at": "2026-07-29T08:56:25.518320+00:00", "job_id": "FB-20260729T085611Z-5AD752", "known_limitations": [ "Schematic preview is not a photorealistic render.", "The draft requires Ray's visual review and slicer verification before printing.", "The replacement inward-flow cascade, separate exit feeder, barrier-free chute and dice-envelope corridor are validated digitally, but tumble reliability requires a physical test print.", "The controlled exit path must still be inspected in section view and slicer preview for local bridging or support needs.", "The integrated draft is non-load-bearing and not production-approved; inspect supports, bridging and orientation in the slicer." ], "material": { "minimum_wall_mm": 2.4, "name": "PLA" }, "metrics": { "bounding_box_mm": { "x": 100.0, "y": 125.0, "z": 238.5 }, "cascade_layout": { "all_tumble_ramps_wall_high_inner_low": true, "alternating_support_walls": true, "catch_overlap_mm": 15.0, "dedicated_exit_feeder": true, "drop_zone_mm": 32.0, "dynamic_envelope_clearance_pass": true, "effective_ramp_angle_deg": 25.0, "exit_feeder": { "angle_deg": 12.0, "exit_edge": "LOW", "exit_y": 3.0, "exit_z": 13.5324, "flow_direction": "rear_interior_to_front_exit_chute", "support_edge": "HIGH", "support_wall": "back", "support_y": 82.0, "support_z": 30.3244 }, "exit_feeder_angle_deg": 12.0, "inter_level_clearances": [ { "from": "exit_feeder", "minimum_clearance_mm": 38.0, "overlap_y_mm": [ 3.0, 50.0 ], "pass": true, "required_clearance_mm": 38.0, "to": "ramp_1" }, { "from": "ramp_1", "minimum_clearance_mm": 38.0, "overlap_y_mm": [ 35.0, 50.0 ], "pass": true, "required_clearance_mm": 38.0, "to": "ramp_2" }, { "from": "ramp_2", "minimum_clearance_mm": 38.0, "overlap_y_mm": [ 35.0, 50.0 ], "pass": true, "required_clearance_mm": 38.0, "to": "ramp_3" }, { "from": "ramp_3", "minimum_clearance_mm": 38.0, "overlap_y_mm": [ 35.0, 50.0 ], "pass": true, "required_clearance_mm": 38.0, "to": "ramp_4" } ], "mechanical_contract": "shire.dice_tower.core.v3", "minimum_catch_overlap_mm": 12.5, "minimum_inter_ramp_clearance_mm": 38.0, "ramp_run_mm": 47.0, "ramps": [ { "flow_direction": "front_wall_to_inner_free_edge", "free_inner_edge": "LOW", "free_y": 50.0, "free_z": 64.7226, "index_from_bottom": 1, "support_edge": "HIGH", "support_wall": "front", "support_y": 3.0, "support_z": 86.6391 }, { "flow_direction": "back_wall_to_inner_free_edge", "free_inner_edge": "LOW", "free_y": 35.0, "free_z": 112.9172, "index_from_bottom": 2, "support_edge": "HIGH", "support_wall": "back", "support_y": 82.0, "support_z": 134.8337 }, { "flow_direction": "front_wall_to_inner_free_edge", "free_inner_edge": "LOW", "free_y": 50.0, "free_z": 161.1118, "index_from_bottom": 3, "support_edge": "HIGH", "support_wall": "front", "support_y": 3.0, "support_z": 183.0283 }, { "flow_direction": "back_wall_to_inner_free_edge", "free_inner_edge": "LOW", "free_y": 35.0, "free_z": 209.3064, "index_from_bottom": 4, "support_edge": "HIGH", "support_wall": "back", "support_y": 82.0, "support_z": 231.2229 } ], "required_height_mm": 237.4229, "required_tumble_envelope_mm": 38.0, "structure": "dynamic_dice_envelope_inward_cascade_plus_separate_exit_feeder" }, "exit_clearance_collision_volume_mm3": 0.0, "solid_count": 1, "valid_shape": true, "volume_mm3": 385641.00038064766 }, "object_family": "dice_tower", "object_name": "Cartoon Dice Tower", "ok": true, "output_formats": [ "step", "stl" ], "parameters": { "base_thickness_mm": 4.0, "cartoon_face_recess": true, "corner_radius_mm": 5.0, "dedicated_exit_feeder": true, "design_theme": "cartoon", "dice_max_mm": 25.0, "dice_passage_width_mm": 32.0, "effective_ramp_angle_deg": 25.0, "exit_chute_angle_deg": 18.0, "exit_chute_barrier_free": true, "exit_chute_enabled": true, "exit_chute_inside_overlap_mm": 14.45, "exit_chute_length_mm": 28.8, "exit_chute_rail_height_mm": 3.84, "exit_chute_rail_width_mm": 3.0, "exit_chute_thickness_mm": 3.2, "exit_chute_width_mm": 40.0, "exit_clearance_height_mm": 30.0, "exit_clearance_width_mm": 32.0, "exit_feeder_angle_deg": 12.0, "exit_height_mm": 50.0, "exit_opening_style": "rounded", "exit_path_mode": "controlled_roll_to_tray", "exit_threshold_step_mm": 0.0, "exit_width_mm": 50.0, "final_ramp_aligned_to_exit": true, "fortress_slits": false, "gothic_lancet_windows": false, "gothic_rose_window": false, "height_auto_adjusted": true, "height_feasibility": "PASS", "height_mm": 238.5, "integrated_collection_tray": true, "legacy_core_v2_squeezed_layout_allowed": false, "legacy_wall_low_ramps_allowed": false, "length_mm": 100.0, "mechanical_contract": "shire.dice_tower.core.v3", "novelty_theme_panel": false, "planned_minimum_inter_ramp_clearance_mm": 38.0, "ramp_angle_max_deg": 45.0, "ramp_angle_min_deg": 38.0, "ramp_count": 4, "ramp_structure": "dynamic_dice_envelope_inward_cascade", "ramp_thickness_mm": 3.2, "requested_height_mm": 175.0, "required_height_mm": 238.5, "required_tumble_envelope_mm": 38.0, "sci_fi_panel_recess": false, "split_required": false, "supersedes_mechanical_contract": "shire.dice_tower.core.v2", "theme_name": "Cartoon", "theme_variant": "standard", "tower_depth_mm": 85.0, "tray_depth_mm": 40.0, "tray_wall_height_mm": 24.0, "tumble_ramp_support_rule": "wall_high_inner_low", "vertical_drop_exit": false, "wall_thickness_mm": 3.0, "width_mm": 125.0 }, "printer": { "build_volume_mm": [ 256.0, 256.0, 256.0 ], "fits": true, "name": "Bambu Lab P1S", "profile_id": "bambu_p1s", "usable_margin_mm": 5.0 }, "project_name": "Stage 3C.6 Cartoon Dice Tower", "safety": { "arbitrary_code_executed": false, "certification_changed": false, "draft_only": true, "forge_permission_changed": false, "forge_ready_exported": false, "non_load_bearing_only": true, "practice_state_modified": false, "production_release": false, "template_whitelist_only": true }, "theme_variant": "standard" }, "status": "completed", "version": "0.6.0-stage3c.6-dynamic-dice-envelope-core-v3-fast-worker" }