{
  "created_at": "2026-07-29T04:20:15.167109+00:00",
  "file_stem": "Cathedral_of_the_Abyss_Dice_Tower_V2",
  "job_id": "FB-20260729T042015Z-E77FEA",
  "material": {
    "minimum_wall_mm": 2.4,
    "name": "PLA"
  },
  "object_family": "gothic_dice_tower",
  "object_name": "Gothic Cathedral Dice Tower",
  "output_formats": [
    "step",
    "stl"
  ],
  "parameters": {
    "base_thickness_mm": 4.0,
    "corner_radius_mm": 5.0,
    "dice_passage_width_mm": 32.0,
    "exit_chute_angle_deg": 18.0,
    "exit_chute_enabled": true,
    "exit_chute_inside_overlap_mm": 13.312,
    "exit_chute_length_mm": 33.696,
    "exit_chute_rail_height_mm": 3.84,
    "exit_chute_thickness_mm": 3.2,
    "exit_chute_width_mm": 38.0,
    "exit_height_mm": 51.3,
    "exit_path_mode": "controlled_roll_to_tray",
    "exit_width_mm": 48.0,
    "final_ramp_aligned_to_exit": true,
    "height_mm": 190.0,
    "integrated_collection_tray": true,
    "lancet_windows_per_side": 2,
    "length_mm": 110.0,
    "ramp_angle_max_deg": 45.0,
    "ramp_angle_min_deg": 38.0,
    "ramp_count": 4,
    "ramp_thickness_mm": 3.2,
    "rose_window_recess": true,
    "split_required": false,
    "tower_depth_mm": 83.2,
    "tray_depth_mm": 46.8,
    "tray_wall_height_mm": 19.95,
    "vertical_drop_exit": false,
    "vertical_rib_count": 4,
    "wall_thickness_mm": 3.0,
    "width_mm": 130.0
  },
  "printer": {
    "build_volume_mm": [
      256.0,
      256.0,
      256.0
    ],
    "fits": true,
    "name": "Bambu Lab P1S",
    "profile_id": "bambu_p1s",
    "usable_margin_mm": 5.0
  },
  "project_name": "Cathedral of the Abyss Dice Tower V2",
  "prompt": "Design a 190 mm high, 110 mm wide and 130 mm deep original Gothic cathedral dice tower with four alternating internal ramps, a pointed arch exit and an integrated collection tray. Exit chute: Enabled\nFinal ramp alignment: Yes\nDoor-to-tray path: Controlled roll",
  "safety": {
    "arbitrary_code_allowed": false,
    "certification_write_allowed": false,
    "draft_only": true,
    "forge_permission_write_allowed": false,
    "non_load_bearing_only": true,
    "practice_state_write_allowed": false,
    "production_release": false,
    "shell_access_allowed": false,
    "template_whitelist_only": true
  },
  "schema": "shire.fast_object_spec.v1",
  "warnings": [
    "Advanced dice-tower family: inspect every ramp and clearance in the 3D viewer and slicer before printing.",
    "The final internal ramp is aligned to a mandatory sloped exit chute so dice roll through the arch into the tray rather than dropping vertically.",
    "The draft validates geometry and minimum passage dimensions, but real dice-tumble behaviour still requires a physical test print.",
    "Gothic motifs are original parametric geometry; no copyrighted character or branded architecture is reproduced."
  ]
}