{
  "created_at": "2026-07-28T13:12:48.285478+00:00",
  "file_stem": "Cathedral_of_the_Abyss_Dice_Tower_V1",
  "job_id": "FB-20260728T131248Z-171D4B",
  "material": {
    "minimum_wall_mm": 2.4,
    "name": "PLA"
  },
  "object_family": "gothic_dice_tower",
  "object_name": "Gothic Cathedral Dice Tower",
  "output_formats": [
    "step",
    "stl"
  ],
  "parameters": {
    "base_thickness_mm": 4.0,
    "corner_radius_mm": 5.0,
    "dice_passage_width_mm": 32.0,
    "exit_height_mm": 51.3,
    "exit_width_mm": 44.0,
    "height_mm": 190.0,
    "integrated_collection_tray": true,
    "lancet_windows_per_side": 2,
    "length_mm": 110.0,
    "ramp_angle_max_deg": 45.0,
    "ramp_angle_min_deg": 38.0,
    "ramp_count": 4,
    "ramp_thickness_mm": 3.2,
    "rose_window_recess": true,
    "split_required": false,
    "tower_depth_mm": 83.2,
    "tray_depth_mm": 46.8,
    "tray_wall_height_mm": 19.95,
    "vertical_rib_count": 4,
    "wall_thickness_mm": 3.0,
    "width_mm": 130.0
  },
  "printer": {
    "build_volume_mm": [
      256.0,
      256.0,
      256.0
    ],
    "fits": true,
    "name": "Bambu Lab P1S",
    "profile_id": "bambu_p1s",
    "usable_margin_mm": 5.0
  },
  "project_name": "Cathedral of the Abyss Dice Tower V1",
  "prompt": "Design a non-load-bearing Gothic cathedral dice tower for standard tabletop dice up to 25 mm.\n\nOverall target size: approximately 190 mm high, 110 mm wide and 130 mm deep, including the collection tray.\n\nCreate a hollow cathedral tower with four alternating internal ramps that force the dice to tumble before exiting through a large pointed Gothic arch into an integrated collection tray.\n\nAdd paired lancet-window cutouts on both side walls, a recessed rose-window pattern on the upper front wall, decorative vertical ribs resembling Gothic buttresses, rounded external edges, and a stable 4 mm base.\n\nUse minimum 3 mm walls and dividers. Keep all dice passages at least 32 mm wide. Internal ramps should be approximately 38\u201345 degrees with enough clearance that dice cannot become trapped.\n\nThe tray should have raised edges and rounded inner corners. Split the tower and tray into printable aligned parts only if required for the Bambu Lab P1S. Use simple alignment tabs and avoid fragile details.\n\nThis is an original Gothic architectural design. Do not use skulls, copyrighted characters, weapons, load-bearing features or unsupported organic sculpture.\n\nGenerate a safe parametric CadQuery draft with editable named dimensions. Do not silently replace this with a nameplate, organiser or basic tray if the dice-tower family is unsupported.",
  "safety": {
    "arbitrary_code_allowed": false,
    "certification_write_allowed": false,
    "draft_only": true,
    "forge_permission_write_allowed": false,
    "non_load_bearing_only": true,
    "practice_state_write_allowed": false,
    "production_release": false,
    "shell_access_allowed": false,
    "template_whitelist_only": true
  },
  "schema": "shire.fast_object_spec.v1",
  "warnings": [
    "Advanced dice-tower family: inspect every ramp and clearance in the 3D viewer and slicer before printing.",
    "The draft validates geometry and minimum passage dimensions, but real dice-tumble behaviour still requires a physical test print.",
    "Gothic motifs are original parametric geometry; no copyrighted character or branded architecture is reproduced."
  ]
}