{
  "assembly": {
    "adhesive": "Use material-appropriate adhesive only after test fit",
    "clearance_per_side_mm": 0.35,
    "key_type": "rectangular anti-rotation",
    "test_fit_before_glue": true
  },
  "build_id": "20260718-160452",
  "limitations": [
    "Slicer simulation has not yet been performed.",
    "Physical print validation has not yet been performed.",
    "Nominal shell thickness is design-based rather than ray-cast measured."
  ],
  "parts": {
    "body": {
      "brim": "Optional 5 mm brim",
      "file": "/home/shire3d/SHIRE_OUTPUT_QUEUE/BMP-0001/STL/BMP-0001_spawn-of-hell-printer-v2_20260718-160452_body.stl",
      "orientation": "Flat rear face directly on build plate; demon face upward",
      "supports": "Designed to minimise supports. Inspect eye rims and deepest mouth areas in slicer."
    },
    "left_horn": {
      "brim": "Recommended 6\u20138 mm brim",
      "file": "/home/shire3d/SHIRE_OUTPUT_QUEUE/BMP-0001/STL/BMP-0001_spawn-of-hell-printer-v2_20260718-160452_horn-left.stl",
      "orientation": "Rectangular peg downward on build plate",
      "supports": "Painted or tree support only if slicer flags the outer bend"
    },
    "right_horn": {
      "brim": "Recommended 6\u20138 mm brim",
      "file": "/home/shire3d/SHIRE_OUTPUT_QUEUE/BMP-0001/STL/BMP-0001_spawn-of-hell-printer-v2_20260718-160452_horn-right.stl",
      "orientation": "Rectangular peg downward on build plate",
      "supports": "Painted or tree support only if slicer flags the outer bend"
    }
  },
  "printer_profile": "Bambu P1S / 256 mm class printer",
  "project_id": "BMP-0001",
  "schema": "shire.blender.print_guide.v2",
  "starting_settings": {
    "first_layer_mm": 0.24,
    "infill_pattern": "gyroid",
    "infill_percent": 12,
    "layer_height_mm": 0.2,
    "material": "PLA or PETG",
    "top_bottom_layers": 5,
    "walls": 4
  },
  "status": "SLICER_REVIEW_REQUIRED"
}