/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ // // Configuration Menu // #include "../../inc/MarlinConfigPre.h" #if HAS_LCD_MENU #include "menu_item.h" #if HAS_FILAMENT_SENSOR #include "../../feature/runout.h" #endif #if HAS_FANCHECK #include "../../feature/fancheck.h" #endif #if ENABLED(POWER_LOSS_RECOVERY) #include "../../feature/powerloss.h" #endif #if HAS_BED_PROBE #include "../../module/probe.h" #if ENABLED(BLTOUCH) #include "../../feature/bltouch.h" #endif #endif #if ENABLED(SOUND_MENU_ITEM) #include "../../libs/buzzer.h" #endif #include "../../core/debug_out.h" #define HAS_DEBUG_MENU ENABLED(LCD_PROGRESS_BAR_TEST) void menu_advanced_settings(); #if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION) void menu_delta_calibrate(); #endif #if ENABLED(LCD_PROGRESS_BAR_TEST) #include "../lcdprint.h" static void progress_bar_test() { static int8_t bar_percent = 0; if (ui.use_click()) { ui.goto_previous_screen(); TERN_(HAS_MARLINUI_HD44780, ui.set_custom_characters(CHARSET_MENU)); return; } bar_percent += (int8_t)ui.encoderPosition; LIMIT(bar_percent, 0, 100); ui.encoderPosition = 0; MenuItem_static::draw(0, GET_TEXT(MSG_PROGRESS_BAR_TEST), SS_DEFAULT|SS_INVERT); lcd_put_int((LCD_WIDTH) / 2 - 2, LCD_HEIGHT - 2, bar_percent); lcd_put_wchar('%'); lcd_moveto(0, LCD_HEIGHT - 1); ui.draw_progress_bar(bar_percent); } void _progress_bar_test() { ui.goto_screen(progress_bar_test); TERN_(HAS_MARLINUI_HD44780, ui.set_custom_characters(CHARSET_INFO)); } #endif // LCD_PROGRESS_BAR_TEST #if HAS_DEBUG_MENU void menu_debug() { START_MENU(); BACK_ITEM(MSG_CONFIGURATION); #if ENABLED(LCD_PROGRESS_BAR_TEST) SUBMENU(MSG_PROGRESS_BAR_TEST, _progress_bar_test); #endif END_MENU(); } #endif #if HAS_MULTI_EXTRUDER #include "../../module/tool_change.h" void menu_tool_change() { START_MENU(); BACK_ITEM(MSG_CONFIGURATION); #if ENABLED(TOOLCHANGE_FILAMENT_SWAP) static constexpr float max_extrude = TERN(PREVENT_LENGTHY_EXTRUDE, EXTRUDE_MAXLENGTH, 500); #if ENABLED(TOOLCHANGE_PARK) EDIT_ITEM(bool, MSG_FILAMENT_PARK_ENABLED, &toolchange_settings.enable_park); #endif EDIT_ITEM(float3, MSG_FILAMENT_SWAP_LENGTH, &toolchange_settings.swap_length, 0, max_extrude); EDIT_ITEM(float41sign, MSG_FILAMENT_SWAP_EXTRA, &toolchange_settings.extra_resume, -10, 10); EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_RETRACT_SPEED, &toolchange_settings.retract_speed, 10, 5400); EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_UNRETRACT_SPEED, &toolchange_settings.unretract_speed, 10, 5400); EDIT_ITEM(float3, MSG_FILAMENT_PURGE_LENGTH, &toolchange_settings.extra_prime, 0, max_extrude); EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_PRIME_SPEED, &toolchange_settings.prime_speed, 10, 5400); EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_FAN_SPEED, &toolchange_settings.fan_speed, 0, 255); EDIT_ITEM_FAST(int4, MSG_SINGLENOZZLE_FAN_TIME, &toolchange_settings.fan_time, 1, 30); #endif EDIT_ITEM(float3, MSG_TOOL_CHANGE_ZLIFT, &toolchange_settings.z_raise, 0, 10); END_MENU(); } #if ENABLED(TOOLCHANGE_MIGRATION_FEATURE) #include "../../module/motion.h" // for active_extruder #include "../../gcode/queue.h" void menu_toolchange_migration() { PGM_P const msg_migrate = GET_TEXT(MSG_TOOL_MIGRATION_SWAP); START_MENU(); BACK_ITEM(MSG_CONFIGURATION); // Auto mode ON/OFF EDIT_ITEM(bool, MSG_TOOL_MIGRATION_AUTO, &migration.automode); EDIT_ITEM(uint8, MSG_TOOL_MIGRATION_END, &migration.last, 0, EXTRUDERS - 1); // Migrate to a chosen extruder LOOP_L_N(s, EXTRUDERS) { if (s != active_extruder) { ACTION_ITEM_N_P(s, msg_migrate, []{ char cmd[12]; sprintf_P(cmd, PSTR("M217 T%i"), int(MenuItemBase::itemIndex)); queue.inject(cmd); }); } } END_MENU(); } #endif #endif #if HAS_HOTEND_OFFSET #include "../../module/motion.h" #include "../../gcode/queue.h" void menu_tool_offsets() { auto _recalc_offsets = []{ if (active_extruder && all_axes_trusted()) { // For the 2nd extruder re-home so the next tool-change gets the new offsets. queue.inject_P(G28_STR); // In future, we can babystep the 2nd extruder (if active), making homing unnecessary. active_extruder = 0; } }; START_MENU(); BACK_ITEM(MSG_CONFIGURATION); #if ENABLED(DUAL_X_CARRIAGE) EDIT_ITEM_FAST_N(float42_52, X_AXIS, MSG_HOTEND_OFFSET_A, &hotend_offset[1].x, float(X2_HOME_POS - 25), float(X2_HOME_POS + 25), _recalc_offsets); #else EDIT_ITEM_FAST_N(float42_52, X_AXIS, MSG_HOTEND_OFFSET_A, &hotend_offset[1].x, -99.0, 99.0, _recalc_offsets); #endif EDIT_ITEM_FAST_N(float42_52, Y_AXIS, MSG_HOTEND_OFFSET_A, &hotend_offset[1].y, -99.0, 99.0, _recalc_offsets); EDIT_ITEM_FAST_N(float42_52, Z_AXIS, MSG_HOTEND_OFFSET_A, &hotend_offset[1].z, Z_PROBE_LOW_POINT, 10.0, _recalc_offsets); #if ENABLED(EEPROM_SETTINGS) ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings); #endif END_MENU(); } #endif #if ENABLED(DUAL_X_CARRIAGE) void menu_idex() { const bool need_g28 = axes_should_home(_BV(Y_AXIS)|_BV(Z_AXIS)); START_MENU(); BACK_ITEM(MSG_CONFIGURATION); GCODES_ITEM(MSG_IDEX_MODE_AUTOPARK, PSTR("M605S1\nG28X\nG1X0")); GCODES_ITEM(MSG_IDEX_MODE_DUPLICATE, need_g28 ? PSTR("M605S1\nT0\nG28\nM605S2\nG28X\nG1X0") // If Y or Z is not homed, do a full G28 first : PSTR("M605S1\nT0\nM605S2\nG28X\nG1X0") ); GCODES_ITEM(MSG_IDEX_MODE_MIRRORED_COPY, need_g28 ? PSTR("M605S1\nT0\nG28\nM605S2\nG28X\nG1X0\nM605S3") // If Y or Z is not homed, do a full G28 first : PSTR("M605S1\nT0\nM605S2\nG28 X\nG1X0\nM605S3") ); GCODES_ITEM(MSG_IDEX_MODE_FULL_CTRL, PSTR("M605S0\nG28X")); EDIT_ITEM(float42_52, MSG_IDEX_DUPE_GAP, &duplicate_extruder_x_offset, (X2_MIN_POS) - (X1_MIN_POS), (X_BED_SIZE) - 20); END_MENU(); } #endif #if ENABLED(BLTOUCH) #if ENABLED(BLTOUCH_LCD_VOLTAGE_MENU) void bltouch_report() { PGMSTR(mode0, "OD"); PGMSTR(mode1, "5V"); DEBUG_ECHOPGM("BLTouch Mode: "); DEBUG_ECHOPGM_P(bltouch.od_5v_mode ? mode1 : mode0); DEBUG_ECHOLNPGM(" (Default " TERN(BLTOUCH_SET_5V_MODE, "5V", "OD") ")"); char mess[21]; strcpy_P(mess, PSTR("BLTouch Mode: ")); strcpy_P(&mess[15], bltouch.od_5v_mode ? mode1 : mode0); ui.set_status(mess); ui.return_to_status(); } #endif void menu_bltouch() { START_MENU(); BACK_ITEM(MSG_CONFIGURATION); ACTION_ITEM(MSG_BLTOUCH_RESET, bltouch._reset); ACTION_ITEM(MSG_BLTOUCH_SELFTEST, bltouch._selftest); ACTION_ITEM(MSG_BLTOUCH_DEPLOY, bltouch._deploy); ACTION_ITEM(MSG_BLTOUCH_STOW, bltouch._stow); ACTION_ITEM(MSG_BLTOUCH_SW_MODE, bltouch._set_SW_mode); #ifdef BLTOUCH_HS_MODE EDIT_ITEM(bool, MSG_BLTOUCH_SPEED_MODE, &bltouch.high_speed_mode); #endif #if ENABLED(BLTOUCH_LCD_VOLTAGE_MENU) CONFIRM_ITEM(MSG_BLTOUCH_5V_MODE, MSG_BLTOUCH_5V_MODE, MSG_BUTTON_CANCEL, bltouch._set_5V_mode, nullptr, GET_TEXT(MSG_BLTOUCH_MODE_CHANGE)); CONFIRM_ITEM(MSG_BLTOUCH_OD_MODE, MSG_BLTOUCH_OD_MODE, MSG_BUTTON_CANCEL, bltouch._set_OD_mode, nullptr, GET_TEXT(MSG_BLTOUCH_MODE_CHANGE)); ACTION_ITEM(MSG_BLTOUCH_MODE_STORE, bltouch._mode_store); CONFIRM_ITEM(MSG_BLTOUCH_MODE_STORE_5V, MSG_BLTOUCH_MODE_STORE_5V, MSG_BUTTON_CANCEL, bltouch.mode_conv_5V, nullptr, GET_TEXT(MSG_BLTOUCH_MODE_CHANGE)); CONFIRM_ITEM(MSG_BLTOUCH_MODE_STORE_OD, MSG_BLTOUCH_MODE_STORE_OD, MSG_BUTTON_CANCEL, bltouch.mode_conv_OD, nullptr, GET_TEXT(MSG_BLTOUCH_MODE_CHANGE)); ACTION_ITEM(MSG_BLTOUCH_MODE_ECHO, bltouch_report); #endif END_MENU(); } #endif #if ENABLED(TOUCH_MI_PROBE) void menu_touchmi() { ui.defer_status_screen(); START_MENU(); BACK_ITEM(MSG_CONFIGURATION); GCODES_ITEM(MSG_TOUCHMI_INIT, PSTR("M851 Z0\nG28\nG1 F200 Z0")); SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); GCODES_ITEM(MSG_TOUCHMI_SAVE, PSTR("M500\nG1 F200 Z10")); GCODES_ITEM(MSG_TOUCHMI_ZTEST, PSTR("G28\nG1 F200 Z0")); END_MENU(); } #endif #if ENABLED(CONTROLLER_FAN_MENU) #include "../../feature/controllerfan.h" void menu_controller_fan() { START_MENU(); BACK_ITEM(MSG_CONFIGURATION); EDIT_ITEM_FAST(percent, MSG_CONTROLLER_FAN_IDLE_SPEED, &controllerFan.settings.idle_speed, CONTROLLERFAN_SPEED_MIN, 255); EDIT_ITEM(bool, MSG_CONTROLLER_FAN_AUTO_ON, &controllerFan.settings.auto_mode); if (controllerFan.settings.auto_mode) { EDIT_ITEM_FAST(percent, MSG_CONTROLLER_FAN_SPEED, &controllerFan.settings.active_speed, CONTROLLERFAN_SPEED_MIN, 255); EDIT_ITEM(uint16_4, MSG_CONTROLLER_FAN_DURATION, &controllerFan.settings.duration, 0, 4800); } END_MENU(); } #endif #if ENABLED(FWRETRACT) #include "../../feature/fwretract.h" void menu_config_retract() { START_MENU(); BACK_ITEM(MSG_CONFIGURATION); #if ENABLED(FWRETRACT_AUTORETRACT) EDIT_ITEM(bool, MSG_AUTORETRACT, &fwretract.autoretract_enabled, fwretract.refresh_autoretract); #endif EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT, &fwretract.settings.retract_length, 0, 100); #if HAS_MULTI_EXTRUDER EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_SWAP, &fwretract.settings.swap_retract_length, 0, 100); #endif EDIT_ITEM(float3, MSG_CONTROL_RETRACTF, &fwretract.settings.retract_feedrate_mm_s, 1, 999); EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_ZHOP, &fwretract.settings.retract_zraise, 0, 999); EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_RECOVER, &fwretract.settings.retract_recover_extra, -100, 100); #if HAS_MULTI_EXTRUDER EDIT_ITEM(float52sign, MSG_CONTROL_RETRACT_RECOVER_SWAP, &fwretract.settings.swap_retract_recover_extra, -100, 100); #endif EDIT_ITEM(float3, MSG_CONTROL_RETRACT_RECOVERF, &fwretract.settings.retract_recover_feedrate_mm_s, 1, 999); #if HAS_MULTI_EXTRUDER EDIT_ITEM(float3, MSG_CONTROL_RETRACT_RECOVER_SWAPF, &fwretract.settings.swap_retract_recover_feedrate_mm_s, 1, 999); #endif END_MENU(); } #endif #if HAS_PREHEAT && DISABLED(SLIM_LCD_MENUS) void _menu_configuration_preheat_settings() { #define _MINTEMP_ITEM(N) HEATER_##N##_MINTEMP, #define _MAXTEMP_ITEM(N) HEATER_##N##_MAXTEMP, #define MINTEMP_ALL _MIN(REPEAT(HOTENDS, _MINTEMP_ITEM) 999) #define MAXTEMP_ALL _MAX(REPEAT(HOTENDS, _MAXTEMP_ITEM) 0) const uint8_t m = MenuItemBase::itemIndex; START_MENU(); STATIC_ITEM_P(ui.get_preheat_label(m), SS_DEFAULT|SS_INVERT); BACK_ITEM(MSG_CONFIGURATION); #if HAS_FAN editable.uint8 = uint8_t(ui.material_preset[m].fan_speed); EDIT_ITEM_N(percent, m, MSG_FAN_SPEED, &editable.uint8, 0, 255, []{ ui.material_preset[MenuItemBase::itemIndex].fan_speed = editable.uint8; }); #endif #if HAS_TEMP_HOTEND EDIT_ITEM(int3, MSG_NOZZLE, &ui.material_preset[m].hotend_temp, MINTEMP_ALL, MAXTEMP_ALL - (HOTEND_OVERSHOOT)); #endif #if HAS_HEATED_BED EDIT_ITEM(int3, MSG_BED, &ui.material_preset[m].bed_temp, BED_MINTEMP, BED_MAX_TARGET); #endif #if ENABLED(EEPROM_SETTINGS) ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings); #endif END_MENU(); } #endif #if ENABLED(CUSTOM_MENU_CONFIG) void _lcd_custom_menus_configuration_gcode(FSTR_P const fstr) { queue.inject(fstr); TERN_(CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK, ui.completion_feedback()); TERN_(CUSTOM_MENU_CONFIG_SCRIPT_RETURN, ui.return_to_status()); } void custom_menus_configuration() { START_MENU(); BACK_ITEM(MSG_MAIN); #define HAS_CUSTOM_ITEM_CONF(N) (defined(CONFIG_MENU_ITEM_##N##_DESC) && defined(CONFIG_MENU_ITEM_##N##_GCODE)) #ifdef CUSTOM_MENU_CONFIG_SCRIPT_DONE #define _DONE_SCRIPT "\n" CUSTOM_MENU_CONFIG_SCRIPT_DONE #else #define _DONE_SCRIPT "" #endif #define GCODE_LAMBDA_CONF(N) []{ _lcd_custom_menus_configuration_gcode(F(CONFIG_MENU_ITEM_##N##_GCODE _DONE_SCRIPT)); } #define _CUSTOM_ITEM_CONF(N) ACTION_ITEM_P(PSTR(CONFIG_MENU_ITEM_##N##_DESC), GCODE_LAMBDA_CONF(N)); #define _CUSTOM_ITEM_CONF_CONFIRM(N) \ SUBMENU_P(PSTR(CONFIG_MENU_ITEM_##N##_DESC), []{ \ MenuItem_confirm::confirm_screen( \ GCODE_LAMBDA_CONF(N), nullptr, \ PSTR(CONFIG_MENU_ITEM_##N##_DESC "?") \ ); \ }) #define CUSTOM_ITEM_CONF(N) do{ \ constexpr char c = CONFIG_MENU_ITEM_##N##_GCODE[strlen(CONFIG_MENU_ITEM_##N##_GCODE) - 1]; \ static_assert(c != '\n' && c != '\r', "CONFIG_MENU_ITEM_" STRINGIFY(N) "_GCODE cannot have a newline at the end. Please remove it."); \ if (ENABLED(CONFIG_MENU_ITEM_##N##_CONFIRM)) \ _CUSTOM_ITEM_CONF_CONFIRM(N); \ else \ _CUSTOM_ITEM_CONF(N); \ }while(0) #if HAS_CUSTOM_ITEM_CONF(1) CUSTOM_ITEM_CONF(1); #endif #if HAS_CUSTOM_ITEM_CONF(2) CUSTOM_ITEM_CONF(2); #endif #if HAS_CUSTOM_ITEM_CONF(3) CUSTOM_ITEM_CONF(3); #endif #if HAS_CUSTOM_ITEM_CONF(4) CUSTOM_ITEM_CONF(4); #endif #if HAS_CUSTOM_ITEM_CONF(5) CUSTOM_ITEM_CONF(5); #endif #if HAS_CUSTOM_ITEM_CONF(6) CUSTOM_ITEM_CONF(6); #endif #if HAS_CUSTOM_ITEM_CONF(7) CUSTOM_ITEM_CONF(7); #endif #if HAS_CUSTOM_ITEM_CONF(8) CUSTOM_ITEM_CONF(8); #endif #if HAS_CUSTOM_ITEM_CONF(9) CUSTOM_ITEM_CONF(9); #endif #if HAS_CUSTOM_ITEM_CONF(10) CUSTOM_ITEM_CONF(10); #endif #if HAS_CUSTOM_ITEM_CONF(11) CUSTOM_ITEM_CONF(11); #endif #if HAS_CUSTOM_ITEM_CONF(12) CUSTOM_ITEM_CONF(12); #endif #if HAS_CUSTOM_ITEM_CONF(13) CUSTOM_ITEM_CONF(13); #endif #if HAS_CUSTOM_ITEM_CONF(14) CUSTOM_ITEM_CONF(14); #endif #if HAS_CUSTOM_ITEM_CONF(15) CUSTOM_ITEM_CONF(15); #endif #if HAS_CUSTOM_ITEM_CONF(16) CUSTOM_ITEM_CONF(16); #endif #if HAS_CUSTOM_ITEM_CONF(17) CUSTOM_ITEM_CONF(17); #endif #if HAS_CUSTOM_ITEM_CONF(18) CUSTOM_ITEM_CONF(18); #endif #if HAS_CUSTOM_ITEM_CONF(19) CUSTOM_ITEM_CONF(19); #endif #if HAS_CUSTOM_ITEM_CONF(20) CUSTOM_ITEM_CONF(20); #endif #if HAS_CUSTOM_ITEM_CONF(21) CUSTOM_ITEM_CONF(21); #endif #if HAS_CUSTOM_ITEM_CONF(22) CUSTOM_ITEM_CONF(22); #endif #if HAS_CUSTOM_ITEM_CONF(23) CUSTOM_ITEM_CONF(23); #endif #if HAS_CUSTOM_ITEM_CONF(24) CUSTOM_ITEM_CONF(24); #endif #if HAS_CUSTOM_ITEM_CONF(25) CUSTOM_ITEM_CONF(25); #endif END_MENU(); } #endif // CUSTOM_MENU_CONFIG void menu_configuration() { const bool busy = printer_busy(); START_MENU(); BACK_ITEM(MSG_MAIN); // // Debug Menu when certain options are enabled // #if HAS_DEBUG_MENU SUBMENU(MSG_DEBUG_MENU, menu_debug); #endif #if ENABLED(CUSTOM_MENU_CONFIG) if (TERN1(CUSTOM_MENU_CONFIG_ONLY_IDLE, !busy)) { #ifdef CUSTOM_MENU_CONFIG_TITLE SUBMENU_P(PSTR(CUSTOM_MENU_CONFIG_TITLE), custom_menus_configuration); #else SUBMENU(MSG_CUSTOM_COMMANDS, custom_menus_configuration); #endif } #endif SUBMENU(MSG_ADVANCED_SETTINGS, menu_advanced_settings); #if ENABLED(BABYSTEP_ZPROBE_OFFSET) SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset); #elif HAS_BED_PROBE EDIT_ITEM(LCD_Z_OFFSET_TYPE, MSG_ZPROBE_ZOFFSET, &probe.offset.z, Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX); #endif //Moved here by TH3D - from menu_advanced.cpp #if ENABLED(PROBE_OFFSET_WIZARD) SUBMENU(MSG_PROBE_WIZARD, goto_probe_offset_wizard); #endif // // Set Fan Controller speed // #if ENABLED(CONTROLLER_FAN_MENU) SUBMENU(MSG_CONTROLLER_FAN, menu_controller_fan); #endif if (!busy) { #if EITHER(DELTA_CALIBRATION_MENU, DELTA_AUTO_CALIBRATION) SUBMENU(MSG_DELTA_CALIBRATE, menu_delta_calibrate); #endif #if HAS_HOTEND_OFFSET SUBMENU(MSG_OFFSETS_MENU, menu_tool_offsets); #endif #if ENABLED(DUAL_X_CARRIAGE) SUBMENU(MSG_IDEX_MENU, menu_idex); #endif #if ENABLED(BLTOUCH) SUBMENU(MSG_BLTOUCH, menu_bltouch); #endif #if ENABLED(TOUCH_MI_PROBE) SUBMENU(MSG_TOUCHMI_PROBE, menu_touchmi); #endif } // // Set single nozzle filament retract and prime length // #if HAS_MULTI_EXTRUDER SUBMENU(MSG_TOOL_CHANGE, menu_tool_change); #if ENABLED(TOOLCHANGE_MIGRATION_FEATURE) SUBMENU(MSG_TOOL_MIGRATION, menu_toolchange_migration); #endif #endif #if HAS_LCD_BRIGHTNESS EDIT_ITEM_FAST(uint8, MSG_BRIGHTNESS, &ui.brightness, LCD_BRIGHTNESS_MIN, LCD_BRIGHTNESS_MAX, ui.refresh_brightness, true); #endif #if HAS_LCD_CONTRAST EDIT_ITEM_FAST(uint8, MSG_CONTRAST, &ui.contrast, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX, ui.refresh_contrast, true); #endif #if ENABLED(FWRETRACT) SUBMENU(MSG_RETRACT, menu_config_retract); #endif #if HAS_FILAMENT_SENSOR EDIT_ITEM(bool, MSG_RUNOUT_SENSOR, &runout.enabled, runout.reset); #endif #if HAS_FANCHECK EDIT_ITEM(bool, MSG_FANCHECK, &fan_check.enabled); #endif #if ENABLED(POWER_LOSS_RECOVERY) EDIT_ITEM(bool, MSG_OUTAGE_RECOVERY, &recovery.enabled, recovery.changed); #endif // Preheat configurations #if HAS_PREHEAT && DISABLED(SLIM_LCD_MENUS) LOOP_L_N(m, PREHEAT_COUNT) SUBMENU_N_S(m, ui.get_preheat_label(m), MSG_PREHEAT_M_SETTINGS, _menu_configuration_preheat_settings); #endif #if ENABLED(SOUND_MENU_ITEM) EDIT_ITEM(bool, MSG_SOUND, &ui.buzzer_enabled, []{ ui.chirp(); }); #endif #if ENABLED(EEPROM_SETTINGS) ACTION_ITEM(MSG_STORE_EEPROM, ui.store_settings); //if (!busy) ACTION_ITEM(MSG_LOAD_EEPROM, ui.load_settings); //Disabled by TH3D #endif //if (!busy) ACTION_ITEM(MSG_RESTORE_DEFAULTS, ui.reset_settings); //Disabled by TH3D //Moved from menu_advanced.cpp to here by TH3D #if ENABLED(EEPROM_SETTINGS) && DISABLED(SLIM_LCD_MENUS) CONFIRM_ITEM(MSG_INIT_EEPROM, MSG_BUTTON_INIT, MSG_BUTTON_CANCEL, ui.init_eeprom, nullptr, GET_TEXT(MSG_INIT_EEPROM), (const char *)nullptr, PSTR("?") ); #endif END_MENU(); } #endif // HAS_LCD_MENU