/** * Marlin 3D Printer Firmware * Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * ZRIB V5.3 Based on MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping */ #include "env_validate.h" #if HOTENDS > 2 #error "ZRIB V5.3 only supports up to 2 hotends. Comment out this line to continue." #elif E_STEPPERS > 3 #error "ZRIB V5.3 only supports up to 3 E-steppers. Comment out this line to continue." #endif #define BOARD_INFO_NAME "ZRIB V5.3" // // PIN 12 Connector // #define PIN_12_PIN 12 // // XS1 Connector // #define XS1_01_PIN 42 #define XS1_03_PIN 43 #define XS1_05_PIN 44 #define XS1_07_PIN 45 #define XS1_08_PIN 47 // // XS6 Connector // #define XS6_01_PIN 20 #define XS6_03_PIN 52 #define XS6_05_PIN 51 #define XS6_07_PIN 50 #define XS6_08_PIN 21 // // Servos / XS3 Connector // #ifndef SERVO0_PIN #define SERVO0_PIN 11 // Analog Output #endif #ifndef SERVO1_PIN #define SERVO1_PIN 12 // Analog Output #endif // // Limit Switches // #ifndef X_STOP_PIN #ifndef X_MIN_PIN #define X_MIN_PIN 3 #endif #ifndef X_MAX_PIN #define X_MAX_PIN 2 #endif #endif #ifndef Y_STOP_PIN #ifndef Y_MIN_PIN #define Y_MIN_PIN 14 #endif #ifndef Y_MAX_PIN #define Y_MAX_PIN 15 #endif #endif #ifndef Z_STOP_PIN #ifndef Z_MIN_PIN #define Z_MIN_PIN 18 #endif #ifndef Z_MAX_PIN #define Z_MAX_PIN 19 #endif #endif // // Z Probe (when not Z_MIN_PIN) // #ifndef Z_MIN_PROBE_PIN #define Z_MIN_PROBE_PIN 19 #endif // // Steppers // #define X_STEP_PIN 54 #define X_DIR_PIN 55 #define X_ENABLE_PIN 38 #define Y_STEP_PIN 60 #define Y_DIR_PIN 61 #define Y_ENABLE_PIN 56 #define Z_STEP_PIN 46 #define Z_DIR_PIN 48 #define Z_ENABLE_PIN 62 #if NUM_Z_STEPPER_DRIVERS == 2 #define Z2_STEP_PIN 26 // E0 connector #define Z2_DIR_PIN 28 #define Z2_ENABLE_PIN 24 #define E0_STEP_PIN 36 // E1 connector #define E0_DIR_PIN 34 #define E0_ENABLE_PIN 30 #define E1_STEP_PIN 4 // E2 connector #define E1_DIR_PIN 5 #define E1_ENABLE_PIN 22 #else #define E0_STEP_PIN 26 #define E0_DIR_PIN 28 #define E0_ENABLE_PIN 24 #define E1_STEP_PIN 36 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 30 #define E2_STEP_PIN 4 #define E2_DIR_PIN 5 #define E2_ENABLE_PIN 22 #endif // // Temperature Sensors // #ifndef TEMP_0_PIN #define TEMP_0_PIN 13 // Analog Input #endif #ifndef TEMP_1_PIN #define TEMP_1_PIN 15 // Analog Input #endif #ifndef TEMP_BED_PIN #define TEMP_BED_PIN 14 // Analog Input #endif // // Heaters / Fans Connectors // #define HEATER_0_PIN 10 #define HEATER_1_PIN 7 #define FAN_PIN 9 #define HEATER_BED_PIN 8 #define FAN1_PIN 6 // // Misc. Functions // #ifndef SDSS #define SDSS 53 #endif #define LED_PIN 13 #ifndef FIL_RUNOUT_PIN #define FIL_RUNOUT_PIN XS1_01_PIN #endif #ifndef PS_ON_PIN #define PS_ON_PIN XS1_03_PIN #endif #if HAS_TMC_UART /** * TMC2209 stepper drivers * * Hardware serial communication ports. * If undefined software serial is used according to the pins below * * Serial2 -- AUX-4 Pin 18 (D16 TX2) and AUX-4 Pin 17 (D17 RX2) * Serial1 -- Pins D18 and D19 are used for Z-MIN and Z-MAX */ //#define X_HARDWARE_SERIAL Serial1 //#define X2_HARDWARE_SERIAL Serial1 //#define Y_HARDWARE_SERIAL Serial1 //#define Y2_HARDWARE_SERIAL Serial1 //#define Z_HARDWARE_SERIAL Serial1 //#define Z2_HARDWARE_SERIAL Serial1 //#define E0_HARDWARE_SERIAL Serial1 //#define E1_HARDWARE_SERIAL Serial1 //#define E2_HARDWARE_SERIAL Serial1 //#define E3_HARDWARE_SERIAL Serial1 //#define E4_HARDWARE_SERIAL Serial1 #ifndef X_SERIAL_TX_PIN #define X_SERIAL_TX_PIN XS1_08_PIN #endif #ifndef X_SERIAL_RX_PIN #define X_SERIAL_RX_PIN PIN_12_PIN #endif #ifndef X2_SERIAL_TX_PIN #define X2_SERIAL_TX_PIN -1 #endif #ifndef X2_SERIAL_RX_PIN #define X2_SERIAL_RX_PIN -1 #endif #ifndef Y_SERIAL_TX_PIN #define Y_SERIAL_TX_PIN XS1_08_PIN #endif #ifndef Y_SERIAL_RX_PIN #define Y_SERIAL_RX_PIN PIN_12_PIN #endif #ifndef Y2_SERIAL_TX_PIN #define Y2_SERIAL_TX_PIN -1 #endif #ifndef Y2_SERIAL_RX_PIN #define Y2_SERIAL_RX_PIN -1 #endif #ifndef Z_SERIAL_TX_PIN #define Z_SERIAL_TX_PIN XS1_08_PIN #endif #ifndef Z_SERIAL_RX_PIN #define Z_SERIAL_RX_PIN PIN_12_PIN #endif #ifndef Z2_SERIAL_TX_PIN #define Z2_SERIAL_TX_PIN XS1_08_PIN #endif #ifndef Z2_SERIAL_RX_PIN #define Z2_SERIAL_RX_PIN PIN_12_PIN #endif #ifndef E0_SERIAL_TX_PIN #define E0_SERIAL_TX_PIN -1 #endif #ifndef E0_SERIAL_RX_PIN #define E0_SERIAL_RX_PIN -1 #endif #ifndef E1_SERIAL_TX_PIN #define E1_SERIAL_TX_PIN -1 #endif #ifndef E1_SERIAL_RX_PIN #define E1_SERIAL_RX_PIN -1 #endif #ifndef E2_SERIAL_TX_PIN #define E2_SERIAL_TX_PIN -1 #endif #ifndef E2_SERIAL_RX_PIN #define E2_SERIAL_RX_PIN -1 #endif #ifndef E3_SERIAL_TX_PIN #define E3_SERIAL_TX_PIN -1 #endif #ifndef E3_SERIAL_RX_PIN #define E3_SERIAL_RX_PIN -1 #endif #ifndef E4_SERIAL_TX_PIN #define E4_SERIAL_TX_PIN -1 #endif #ifndef E4_SERIAL_RX_PIN #define E4_SERIAL_RX_PIN -1 #endif #ifndef E5_SERIAL_TX_PIN #define E5_SERIAL_TX_PIN -1 #endif #ifndef E5_SERIAL_RX_PIN #define E5_SERIAL_RX_PIN -1 #endif #ifndef E6_SERIAL_TX_PIN #define E6_SERIAL_TX_PIN -1 #endif #ifndef E6_SERIAL_RX_PIN #define E6_SERIAL_RX_PIN -1 #endif #ifndef E7_SERIAL_TX_PIN #define E7_SERIAL_TX_PIN -1 #endif #ifndef E7_SERIAL_RX_PIN #define E7_SERIAL_RX_PIN -1 #endif #endif /** * LCD adapter. NOTE: These come in two variants. The socket keys can be * on either side, and may be backwards on some displays. * ------ ------ * D37 |10 9 | D35 (MISO) D50 |10 9 | D52 (SCK) * D17 | 8 7 | D16 D31 | 8 7 | D53 * D23 6 5 D25 D33 6 5 D51 (MOSI) * D27 | 4 3 | D29 D49 | 4 3 | D41 * GND | 2 1 | 5V GND | 2 1 | -- * ------ ------ * EXP1 EXP2 */ #ifndef EXP1_03_PIN #define EXP1_03_PIN 29 #define EXP1_04_PIN 27 #define EXP1_05_PIN 25 #define EXP1_06_PIN 23 #define EXP1_07_PIN 16 #define EXP1_08_PIN 17 #define EXP1_09_PIN 35 #define EXP1_10_PIN 37 #define EXP2_03_PIN 41 #define EXP2_04_PIN 49 #define EXP2_05_PIN XS6_05_PIN #define EXP2_06_PIN 33 #define EXP2_07_PIN 53 #define EXP2_08_PIN 31 #define EXP2_09_PIN XS6_03_PIN #define EXP2_10_PIN XS6_07_PIN #endif ////////////////////////// // LCDs and Controllers // ////////////////////////// #if ENABLED(ZONESTAR_12864LCD) #define LCDSCREEN_NAME "ZONESTAR LCD12864" #define LCD_SDSS 16 #define LCD_PINS_RS 16 // ST7920_CS_PIN LCD_PIN_RS (PIN4 of LCD module) #define LCD_PINS_ENABLE 23 // ST7920_DAT_PIN LCD_PIN_R/W (PIN5 of LCD module) #define LCD_PINS_D4 17 // ST7920_CLK_PIN LCD_PIN_ENABLE (PIN6 of LCD module) #define BTN_EN2 25 #define BTN_EN1 27 #define BTN_ENC 29 #define BEEPER_PIN 37 #define KILL_PIN 35 #elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define LCDSCREEN_NAME "Reprap LCD12864" // Use EXP1 & EXP2 connector #define LCD_PINS_RS 16 // ST7920_CS_PIN LCD_PIN_RS #define LCD_PINS_ENABLE 17 // ST7920_DAT_PIN LCD_PIN_ENABLE #define LCD_PINS_D4 23 // ST7920_CLK_PIN LCD_PIN_R/W #define BTN_EN1 31 #define BTN_EN2 33 #define BTN_ENC 35 #define BEEPER_PIN 37 #define KILL_PIN 41 #endif //================================================================================ // OLED 128x64 //================================================================================ #if EITHER(ZONESTAR_12864OLED, ZONESTAR_12864OLED_SSD1306) #define LCDSCREEN_NAME "ZONESTAR 12864OLED" #define LCD_SDSS 16 #define LCD_PINS_RS 23 // RESET Pull low for 1s to init #define LCD_PINS_DC 17 #define DOGLCD_CS 16 // CS #define BTN_EN2 25 #define BTN_EN1 27 #define BTN_ENC 29 #define BEEPER_PIN -1 #define KILL_PIN -1 #if EITHER(OLED_HW_IIC, OLED_HW_SPI) #error "Oops! You must choose SW SPI for ZRIB V53 board and connect the OLED screen to EXP1 connector." #else // SW_SPI #define DOGLCD_A0 LCD_PINS_DC #define DOGLCD_MOSI 35 // SDA #define DOGLCD_SCK 37 // SCK #endif #endif // OLED 128x64 //================================================================================ // LCD 2004 KEYPAD //================================================================================ #if ENABLED(ZONESTAR_LCD) #define LCDSCREEN_NAME "LCD2004 ADCKEY" #define LCD_PINS_RS EXP1_07_PIN #define LCD_PINS_ENABLE EXP1_08_PIN #define LCD_PINS_D4 EXP1_06_PIN #define LCD_PINS_D5 EXP1_05_PIN #define LCD_PINS_D6 EXP1_04_PIN #define LCD_PINS_D7 EXP1_03_PIN #define ADC_KEYPAD_PIN 10 // A10 for ADCKEY #define BEEPER_PIN EXP1_10_PIN #endif /** * ZRIB V5.3 Main Board * * Available connectors on ZRIB V5.3 * * ======= * | GND | * |-----| E0 * | 10 | (10) PB4 ** Pin23 ** PWM10 * |-----| * | GND | * |-----| E1 * | 7 | ( 7) PH4 ** Pin16 ** PWM7 * |-----| * | GND | * |-----| FAN * | 9 | ( 9) PH6 ** Pin18 ** PWM9 * ======= * ======= * | GND | * |-----| Heated Bed * | 8 | ( 8) PH5 ** Pin17 ** PWM8 * ======= * ========== * | 12-24V | * |--------| Power * | GND | * ========== * XS3 Connector * ================= * | 65 | GND | 5V | (65) PK3 ** Pin86 ** A11 * |----|-----|----| * | 66 | GND | 5V | (66) PK4 ** Pin85 ** A12 * ================= * XS3/Servos Connector * ================= * | 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11 * |----|-----|----| * | 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12 * ================= * ICSP * ================= * | 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI * |----|----|-----| * | 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO * ================= (52) PB1 ** Pin20 ** SPI_SCK * XS6 Connector * ====================== * | 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA * |----|-----|----|----| * | 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO * ====================== (51) PB2 ** Pin21 ** SPI_MOSI * (52) PB1 ** Pin20 ** SPI_SCK * (21) PD0 ** Pin43 ** I2C_SCL * XS1 Connector * ====================== * | 5V | GND | NC | 47 | (47) PL2 ** Pin37 ** D47 * |----|-----|----|----| * | 42 | 43 | 44 | 45 | (45) PL4 ** Pin39 ** D45 * ====================== (44) PL5 ** Pin40 ** D44 * (43) PL6 ** Pin41 ** D43 * (42) PL7 ** Pin42 ** D42 * Temperature * ================================== * | GND | 69 | GND | 68 | GND | 67 | * ================================== * (69) PK7 ** Pin82 ** A15 * (68) PK6 ** Pin83 ** A14 * (67) PK5 ** Pin84 ** A13 * Limit Switches * ============ * | 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2 * |----|-----| * | 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3 * |----|-----| * | 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX * |----|-----| * | 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX * |----|-----| * | 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX * |----|-----| * | 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX * ============ * EXP1 * ============ * | 37 | 35 | (37) PC0 ** Pin53 ** D37 * |-----|----| (35) PC2 ** Pin55 ** D35 * | 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX * |-----|----| (16) PH1 ** Pin13 ** USART2_TX * | 23 | 25 | (23) PA1 ** Pin77 ** D23 * |-----|----| (25) PA3 ** Pin75 ** D25 * | 27 | 29 | (27) PA5 ** Pin73 ** D27 * |-----|----| (29) PA7 ** Pin71 ** D29 * | GND | 5V | * ============ * EXP2 * ============ * | 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO * |-----|----| (52) PB1 ** Pin20 ** SPI_SCK * | 31 | 53 | (31) PC6 ** Pin59 ** D31 * |-----|----| (53) PB0 ** Pin19 ** SPI_SS * | 33 | 51 | (33) PC4 ** Pin57 ** D33 * |-----|----| (51) PB2 ** Pin21 ** SPI_MOSI * | 49 | 41 | (49) PL0 ** Pin35 ** D49 * |-----|----| (41) PG0 ** Pin51 ** D41 * | GND | NC | * ============ * * PIN 12 * ====== * | 12 | (12) PB6 ** Pin25 ** D12 * ====== */