/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Danish * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html */ #define DISPLAY_CHARSET_ISO10646_1 namespace Language_da { using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 2; LSTR LANGUAGE = _UxGT("Danish"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" er klar"); LSTR MSG_MEDIA_INSERTED = _UxGT("Kort isat"); LSTR MSG_MEDIA_REMOVED = _UxGT("Kort fjernet"); LSTR MSG_MAIN = _UxGT("Menu"); LSTR MSG_DISABLE_STEPPERS = _UxGT("Slå alle steppere fra"); LSTR MSG_AUTO_HOME = _UxGT("Auto Home"); // G28 LSTR MSG_LEVEL_BED_WAITING = _UxGT("Klik når du er klar"); LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("Næste punkt"); LSTR MSG_LEVEL_BED_DONE = _UxGT("Bed level er færdig!"); LSTR MSG_SET_HOME_OFFSETS = _UxGT("Sæt forsk. af home"); LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("Forsk. er nu aktiv"); #if HAS_PREHEAT LSTR MSG_PREHEAT_1 = _UxGT("Forvarm ") PREHEAT_1_LABEL; LSTR MSG_PREHEAT_1_H = _UxGT("Forvarm ") PREHEAT_1_LABEL " ~"; LSTR MSG_PREHEAT_1_END = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" end"); LSTR MSG_PREHEAT_1_END_E = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" end ~"); LSTR MSG_PREHEAT_1_ALL = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" Alle"); LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" Bed"); LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Forvarm ") PREHEAT_1_LABEL _UxGT(" conf"); LSTR MSG_PREHEAT_M = _UxGT("Forvarm $"); LSTR MSG_PREHEAT_M_H = _UxGT("Forvarm $ ~"); LSTR MSG_PREHEAT_M_END = _UxGT("Forvarm $ end"); LSTR MSG_PREHEAT_M_END_E = _UxGT("Forvarm $ end ~"); LSTR MSG_PREHEAT_M_ALL = _UxGT("Forvarm $ Alle"); LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("Forvarm $ Bed"); LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("Forvarm $ conf"); #endif LSTR MSG_COOLDOWN = _UxGT("Afkøl"); LSTR MSG_SWITCH_PS_ON = _UxGT("Slå strøm til"); LSTR MSG_SWITCH_PS_OFF = _UxGT("Slå strøm fra"); LSTR MSG_EXTRUDE = _UxGT("Extruder"); LSTR MSG_MOVE_AXIS = _UxGT("Flyt akser"); LSTR MSG_BED_LEVELING = _UxGT("Juster bed"); LSTR MSG_LEVEL_BED = _UxGT("Juster bed"); LSTR MSG_MOVE_X = _UxGT("Flyt X"); LSTR MSG_MOVE_Y = _UxGT("Flyt Y"); LSTR MSG_MOVE_Z = _UxGT("Flyt Z"); LSTR MSG_MOVE_N_MM = _UxGT("Flyt %smm"); LSTR MSG_MOVE_01MM = _UxGT("Flyt 0.1mm"); LSTR MSG_MOVE_1MM = _UxGT("Flyt 1mm"); LSTR MSG_MOVE_10MM = _UxGT("Flyt 10mm"); LSTR MSG_MOVE_100MM = _UxGT("Flyt 100mm"); LSTR MSG_SPEED = _UxGT("Hastighed"); LSTR MSG_BED_Z = _UxGT("Plade Z"); LSTR MSG_NOZZLE = _UxGT("Dyse"); LSTR MSG_NOZZLE_N = _UxGT("Dyse ~"); LSTR MSG_BED = _UxGT("Plade"); LSTR MSG_FAN_SPEED = _UxGT("Blæser hastighed"); LSTR MSG_FAN_SPEED_N = _UxGT("Blæser hastighed ~"); LSTR MSG_CONTROL = _UxGT("Kontrol"); LSTR MSG_MIN = _UxGT(" \002 Min"); LSTR MSG_MAX = _UxGT(" \002 Max"); LSTR MSG_FACTOR = _UxGT(" \002 Fact"); LSTR MSG_AUTOTEMP = _UxGT("Autotemp"); LSTR MSG_LCD_ON = _UxGT("Til"); LSTR MSG_LCD_OFF = _UxGT("Fra"); LSTR MSG_SELECT = _UxGT("Vælg"); LSTR MSG_SELECT_E = _UxGT("Vælg *"); LSTR MSG_A_RETRACT = _UxGT("A-retract"); LSTR MSG_A_TRAVEL = _UxGT("A-rejse"); LSTR MSG_TEMPERATURE = _UxGT("Temperatur"); LSTR MSG_MOTION = _UxGT("Bevægelse"); LSTR MSG_FILAMENT = _UxGT("Filament"); LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E i mm") SUPERSCRIPT_THREE; LSTR MSG_FILAMENT_DIAM = _UxGT("Fil. Dia."); LSTR MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *"); LSTR MSG_CONTRAST = _UxGT("LCD kontrast"); LSTR MSG_STORE_EEPROM = _UxGT("Gem i EEPROM"); LSTR MSG_LOAD_EEPROM = _UxGT("Hent fra EEPROM"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Gendan Defaults"); LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Genopfrisk"); LSTR MSG_INFO_SCREEN = _UxGT("Info skærm"); LSTR MSG_PREPARE = _UxGT("Forbered"); LSTR MSG_PAUSE_PRINT = _UxGT("Pause printet"); LSTR MSG_RESUME_PRINT = _UxGT("Forsæt printet"); LSTR MSG_STOP_PRINT = _UxGT("Stop printet"); LSTR MSG_MEDIA_MENU = _UxGT("Print fra SD"); LSTR MSG_NO_MEDIA = _UxGT("Intet SD kort"); LSTR MSG_DWELL = _UxGT("Dvale..."); LSTR MSG_USERWAIT = _UxGT("Venter på bruger..."); LSTR MSG_PRINT_ABORTED = _UxGT("Print annulleret"); LSTR MSG_NO_MOVE = _UxGT("Ingen bevægelse."); LSTR MSG_KILLED = _UxGT("DRÆBT. "); LSTR MSG_STOPPED = _UxGT("STOPPET. "); LSTR MSG_CONTROL_RETRACT = _UxGT("Tilbagetræk mm"); LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Skift Re.mm"); LSTR MSG_CONTROL_RETRACTF = _UxGT("Tilbagetræk V"); LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Hop mm"); LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("Unretr. mm"); LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Skift Unretr. mm"); LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("Unretract V"); LSTR MSG_AUTORETRACT = _UxGT("Auto-Retract"); LSTR MSG_FILAMENTCHANGE = _UxGT("Skift filament"); LSTR MSG_FILAMENTCHANGE_E = _UxGT("Skift filament *"); LSTR MSG_CHANGE_MEDIA = _UxGT("Skift SD kort"); LSTR MSG_ZPROBE_OUT = _UxGT("Probe udenfor plade"); LSTR MSG_BLTOUCH_SELFTEST = _UxGT("BLTouch Selv-Test"); LSTR MSG_HOME_FIRST = _UxGT("Home %s%s%s først"); LSTR MSG_HEATING_FAILED_LCD = _UxGT("Opvarmning fejlet"); LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("Fejl: reserve temp"); LSTR MSG_THERMAL_RUNAWAY = _UxGT("Temp løber løbsk"); LSTR MSG_ERR_MAXTEMP = _UxGT("Fejl: Maks temp"); LSTR MSG_ERR_MINTEMP = _UxGT("Fejl: Min temp"); LSTR MSG_HALTED = _UxGT("PRINTER STOPPET"); LSTR MSG_PLEASE_RESET = _UxGT("Reset Venligst"); LSTR MSG_HEATING = _UxGT("Opvarmer..."); LSTR MSG_BED_HEATING = _UxGT("Opvarmer plade..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Delta Kalibrering"); LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Kalibrer X"); LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Kalibrer Y"); LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("Kalibrer Z"); LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("Kalibrerings Center"); LSTR MSG_INFO_MENU = _UxGT("Om Printer"); LSTR MSG_INFO_BOARD_MENU = _UxGT("Kort Info"); LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistors"); #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2 LSTR MSG_INFO_PRINT_COUNT = _UxGT("Ant. Prints"); LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Færdige"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Total print tid"); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Længste print"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Total Extruderet"); #else LSTR MSG_INFO_PRINT_COUNT = _UxGT("Prints"); LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Færdige"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Total"); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Længste"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Extruderet"); #endif LSTR MSG_INFO_PSU = _UxGT("Strømfors."); LSTR MSG_DRIVE_STRENGTH = _UxGT("Driv Styrke"); LSTR MSG_DAC_PERCENT_A = STR_A _UxGT(" Driv %"); LSTR MSG_DAC_PERCENT_B = STR_B _UxGT(" Driv %"); LSTR MSG_DAC_PERCENT_C = STR_C _UxGT(" Driv %"); LSTR MSG_DAC_PERCENT_I = STR_I _UxGT(" Driv %"); LSTR MSG_DAC_PERCENT_J = STR_J _UxGT(" Driv %"); LSTR MSG_DAC_PERCENT_K = STR_K _UxGT(" Driv %"); LSTR MSG_DAC_PERCENT_E = _UxGT("E Driv %"); LSTR MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM Skriv"); LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Forsæt print"); LSTR MSG_KILL_EXPECTED_PRINTER = _UxGT("Forkert printer"); #if LCD_HEIGHT >= 4 LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Vent på start", "af filament", "skift")); LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Vent på", "filament udskyd.")); LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Indsæt filament", "og tryk på knap", "for at fortsætte...")); LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Vent på", "filament indtag")); LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Vent på at print", "fortsætter")); #else // LCD_HEIGHT < 4 LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_1_LINE("Vent venligst...")); LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_1_LINE("Udskyder...")); LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_1_LINE("Indsæt og klik")); LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_1_LINE("Indtager...")); LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_1_LINE("Fortsætter...")); #endif // LCD_HEIGHT < 4 }