/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Aragonese * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html */ #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 namespace Language_an { using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 1; LSTR LANGUAGE = _UxGT("Aragonese"); LSTR WELCOME_MSG = MACHINE_NAME _UxGT(" parada."); LSTR MSG_MEDIA_INSERTED = _UxGT("Tarcheta mesa"); LSTR MSG_MEDIA_REMOVED = _UxGT("Tarcheta sacada"); LSTR MSG_LCD_ENDSTOPS = _UxGT("Endstops"); // Max length 8 characters LSTR MSG_MAIN = _UxGT("Menu prencipal"); LSTR MSG_RUN_AUTO_FILES = _UxGT("Inicio automatico"); LSTR MSG_DISABLE_STEPPERS = _UxGT("Amortar motors"); LSTR MSG_HOMING = _UxGT("Orichen"); LSTR MSG_AUTO_HOME = _UxGT("Levar a l'orichen"); LSTR MSG_AUTO_HOME_X = _UxGT("Orichen X"); LSTR MSG_AUTO_HOME_Y = _UxGT("Orichen Y"); LSTR MSG_AUTO_HOME_Z = _UxGT("Orichen Z"); LSTR MSG_LEVEL_BED_HOMING = _UxGT("Orichen XYZ"); LSTR MSG_LEVEL_BED_WAITING = _UxGT("Encetar (pretar)"); LSTR MSG_LEVEL_BED_NEXT_POINT = _UxGT("Vinient punto"); LSTR MSG_LEVEL_BED_DONE = _UxGT("Nivelacion feita!"); LSTR MSG_SET_HOME_OFFSETS = _UxGT("Achustar desfases"); LSTR MSG_HOME_OFFSETS_APPLIED = _UxGT("Desfase aplicau"); #if HAS_PREHEAT LSTR MSG_PREHEAT_1 = _UxGT("Precalentar ") PREHEAT_1_LABEL; LSTR MSG_PREHEAT_1_H = _UxGT("Precalentar ") PREHEAT_1_LABEL " ~"; LSTR MSG_PREHEAT_1_END = _UxGT("Precal. ") PREHEAT_1_LABEL _UxGT(" Boquilla"); LSTR MSG_PREHEAT_1_END_E = _UxGT("Precal. ") PREHEAT_1_LABEL _UxGT(" Boquilla ~"); LSTR MSG_PREHEAT_1_ALL = _UxGT("Precalentar ") PREHEAT_1_LABEL _UxGT(" Tot"); LSTR MSG_PREHEAT_1_BEDONLY = _UxGT("Precalentar ") PREHEAT_1_LABEL _UxGT(" Base"); LSTR MSG_PREHEAT_1_SETTINGS = _UxGT("Precalentar ") PREHEAT_1_LABEL _UxGT(" Conf"); LSTR MSG_PREHEAT_M = _UxGT("Precalentar $"); LSTR MSG_PREHEAT_M_H = _UxGT("Precalentar $ ~"); LSTR MSG_PREHEAT_M_END = _UxGT("Precal. $ Boquilla"); LSTR MSG_PREHEAT_M_END_E = _UxGT("Precal. $ Boquilla ~"); LSTR MSG_PREHEAT_M_ALL = _UxGT("Precalentar $ Tot"); LSTR MSG_PREHEAT_M_BEDONLY = _UxGT("Precalentar $ Base"); LSTR MSG_PREHEAT_M_SETTINGS = _UxGT("Precalentar $ Conf"); #endif LSTR MSG_COOLDOWN = _UxGT("Enfriar"); LSTR MSG_SWITCH_PS_ON = _UxGT("Enchegar Fuent"); LSTR MSG_SWITCH_PS_OFF = _UxGT("Amortar Fuent"); LSTR MSG_EXTRUDE = _UxGT("Extruir"); LSTR MSG_RETRACT = _UxGT("Retraer"); LSTR MSG_MOVE_AXIS = _UxGT("Mover Eixes"); LSTR MSG_BED_LEVELING = _UxGT("Nivelar base"); LSTR MSG_LEVEL_BED = _UxGT("Nivelar base"); LSTR MSG_MOVE_X = _UxGT("Mover X"); LSTR MSG_MOVE_Y = _UxGT("Mover Y"); LSTR MSG_MOVE_Z = _UxGT("Mover Z"); LSTR MSG_MOVE_E = _UxGT("Extrusor"); LSTR MSG_MOVE_EN = _UxGT("Extrusor *"); LSTR MSG_MOVE_N_MM = _UxGT("Mover %smm"); LSTR MSG_MOVE_01MM = _UxGT("Mover 0.1mm"); LSTR MSG_MOVE_1MM = _UxGT("Mover 1mm"); LSTR MSG_MOVE_10MM = _UxGT("Mover 10mm"); LSTR MSG_MOVE_100MM = _UxGT("Mover 100mm"); LSTR MSG_SPEED = _UxGT("Velocidat"); LSTR MSG_BED_Z = _UxGT("Base Z"); LSTR MSG_NOZZLE = _UxGT("Boquilla"); LSTR MSG_NOZZLE_N = _UxGT("Boquilla ~"); LSTR MSG_BED = _UxGT("Base"); LSTR MSG_FAN_SPEED = _UxGT("Ixoriador"); LSTR MSG_FAN_SPEED_N = _UxGT("Ixoriador ~"); LSTR MSG_FLOW = _UxGT("Fluxo"); LSTR MSG_FLOW_N = _UxGT("Fluxo ~"); LSTR MSG_CONTROL = _UxGT("Control"); LSTR MSG_AUTOTEMP = _UxGT("Temperatura Auto."); LSTR MSG_SELECT = _UxGT("Trigar"); LSTR MSG_SELECT_E = _UxGT("Trigar *"); LSTR MSG_ACC = _UxGT("Aceleracion"); LSTR MSG_VTRAV_MIN = _UxGT("Vel. viache min"); LSTR MSG_ACCELERATION = _UxGT("Accel"); LSTR MSG_AMAX_A = _UxGT("Acel. max ") STR_A; LSTR MSG_AMAX_B = _UxGT("Acel. max ") STR_B; LSTR MSG_AMAX_C = _UxGT("Acel. max ") STR_C; LSTR MSG_AMAX_I = _UxGT("Acel. max ") STR_I; LSTR MSG_AMAX_J = _UxGT("Acel. max ") STR_J; LSTR MSG_AMAX_K = _UxGT("Acel. max ") STR_K; LSTR MSG_AMAX_E = _UxGT("Acel. max ") STR_E; LSTR MSG_AMAX_EN = _UxGT("Acel. max *"); LSTR MSG_A_RETRACT = _UxGT("Acel. retrac."); LSTR MSG_A_TRAVEL = _UxGT("Acel. Viaje"); LSTR MSG_STEPS_PER_MM = _UxGT("Trangos/mm"); LSTR MSG_A_STEPS = STR_A _UxGT(" trangos/mm"); LSTR MSG_B_STEPS = STR_B _UxGT(" trangos/mm"); LSTR MSG_C_STEPS = STR_C _UxGT(" trangos/mm"); LSTR MSG_I_STEPS = STR_I _UxGT(" trangos/mm"); LSTR MSG_J_STEPS = STR_J _UxGT(" trangos/mm"); LSTR MSG_K_STEPS = STR_K _UxGT(" trangos/mm"); LSTR MSG_E_STEPS = _UxGT("E trangos/mm"); LSTR MSG_EN_STEPS = _UxGT("* trangos/mm"); LSTR MSG_TEMPERATURE = _UxGT("Temperatura"); LSTR MSG_MOTION = _UxGT("Movimiento"); LSTR MSG_FILAMENT = _UxGT("Filamento"); LSTR MSG_VOLUMETRIC_ENABLED = _UxGT("E in mm") SUPERSCRIPT_THREE; LSTR MSG_FILAMENT_DIAM = _UxGT("Fil. Dia."); LSTR MSG_FILAMENT_DIAM_E = _UxGT("Fil. Dia. *"); LSTR MSG_CONTRAST = _UxGT("Contraste"); LSTR MSG_STORE_EEPROM = _UxGT("Alzar memoria"); LSTR MSG_LOAD_EEPROM = _UxGT("Cargar memoria"); LSTR MSG_RESTORE_DEFAULTS = _UxGT("Restaurar memoria"); LSTR MSG_REFRESH = LCD_STR_REFRESH _UxGT("Tornar a cargar"); LSTR MSG_INFO_SCREEN = _UxGT("Informacion"); LSTR MSG_PREPARE = _UxGT("Preparar"); LSTR MSG_TUNE = _UxGT("Achustar"); LSTR MSG_PAUSE_PRINT = _UxGT("Pausar impresion"); LSTR MSG_RESUME_PRINT = _UxGT("Contin. impresion"); LSTR MSG_STOP_PRINT = _UxGT("Detener Impresion"); LSTR MSG_MEDIA_MENU = _UxGT("Menu de SD"); LSTR MSG_NO_MEDIA = _UxGT("No i hai tarcheta"); LSTR MSG_DWELL = _UxGT("Reposo..."); LSTR MSG_USERWAIT = _UxGT("Aguardand ordines"); LSTR MSG_PRINT_ABORTED = _UxGT("Impres. cancelada"); LSTR MSG_NO_MOVE = _UxGT("Sin movimiento"); LSTR MSG_KILLED = _UxGT("Aturada d'emerch."); LSTR MSG_STOPPED = _UxGT("Aturada."); LSTR MSG_CONTROL_RETRACT = _UxGT("Retraer mm"); LSTR MSG_CONTROL_RETRACT_SWAP = _UxGT("Swap Retraer mm"); LSTR MSG_CONTROL_RETRACTF = _UxGT("Retraer F"); LSTR MSG_CONTROL_RETRACT_ZHOP = _UxGT("Devantar mm"); LSTR MSG_CONTROL_RETRACT_RECOVER = _UxGT("DesRet mm"); LSTR MSG_CONTROL_RETRACT_RECOVER_SWAP = _UxGT("Swap DesRet mm"); LSTR MSG_CONTROL_RETRACT_RECOVERF = _UxGT("DesRet F"); LSTR MSG_AUTORETRACT = _UxGT("Retraccion auto."); LSTR MSG_FILAMENTCHANGE = _UxGT("Cambear filamento"); LSTR MSG_FILAMENTCHANGE_E = _UxGT("Cambear filamento *"); LSTR MSG_ATTACH_MEDIA = _UxGT("Encetan. tarcheta"); LSTR MSG_CHANGE_MEDIA = _UxGT("Cambiar tarcheta"); LSTR MSG_ZPROBE_OUT = _UxGT("Sonda Z fuera"); LSTR MSG_BLTOUCH_RESET = _UxGT("Reset BLTouch"); LSTR MSG_ZPROBE_ZOFFSET = _UxGT("Desfase Z"); LSTR MSG_BABYSTEP_X = _UxGT("Micropaso X"); LSTR MSG_BABYSTEP_Y = _UxGT("Micropaso Y"); LSTR MSG_BABYSTEP_Z = _UxGT("Micropaso Z"); LSTR MSG_ENDSTOP_ABORT = _UxGT("Cancelado - Endstop"); LSTR MSG_HEATING_FAILED_LCD = _UxGT("Error: en calentar"); LSTR MSG_ERR_REDUNDANT_TEMP = _UxGT("Error: temperatura"); LSTR MSG_THERMAL_RUNAWAY = _UxGT("Error de temperatura"); LSTR MSG_ERR_MAXTEMP = _UxGT("Error: Temp Max"); LSTR MSG_ERR_MINTEMP = _UxGT("Error: Temp Min"); LSTR MSG_HALTED = _UxGT("IMPRESORA ATURADA"); LSTR MSG_PLEASE_RESET = _UxGT("Per favor reinic."); LSTR MSG_HEATING = _UxGT("Calentando..."); LSTR MSG_BED_HEATING = _UxGT("Calentando base..."); LSTR MSG_DELTA_CALIBRATE = _UxGT("Calibracion Delta"); LSTR MSG_DELTA_CALIBRATE_X = _UxGT("Calibrar X"); LSTR MSG_DELTA_CALIBRATE_Y = _UxGT("Calibrar Y"); LSTR MSG_DELTA_CALIBRATE_Z = _UxGT("Calibrar Z"); LSTR MSG_DELTA_CALIBRATE_CENTER = _UxGT("Calibrar Centro"); LSTR MSG_INFO_MENU = _UxGT("Inf. Impresora"); LSTR MSG_INFO_PRINTER_MENU = _UxGT("Inf. Impresora"); LSTR MSG_INFO_STATS_MENU = _UxGT("Estadisticas Imp."); LSTR MSG_INFO_BOARD_MENU = _UxGT("Inf. Controlador"); LSTR MSG_INFO_THERMISTOR_MENU = _UxGT("Termistors"); LSTR MSG_INFO_EXTRUDERS = _UxGT("Extrusors"); LSTR MSG_INFO_BAUDRATE = _UxGT("Baudios"); LSTR MSG_INFO_PROTOCOL = _UxGT("Protocolo"); LSTR MSG_CASE_LIGHT = _UxGT("Luz"); #if LCD_WIDTH >= 20 || HAS_DWIN_E3V2 LSTR MSG_INFO_PRINT_COUNT = _UxGT("Conteo de impresion"); LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Completadas"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Tiempo total d'imp."); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Impresion mas larga"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Total d'extrusion"); #else LSTR MSG_INFO_PRINT_COUNT = _UxGT("Impresions"); LSTR MSG_INFO_COMPLETED_PRINTS = _UxGT("Completadas"); LSTR MSG_INFO_PRINT_TIME = _UxGT("Total"); LSTR MSG_INFO_PRINT_LONGEST = _UxGT("Mas larga"); LSTR MSG_INFO_PRINT_FILAMENT = _UxGT("Extrusion"); #endif LSTR MSG_INFO_MIN_TEMP = _UxGT("Temperatura menima"); LSTR MSG_INFO_MAX_TEMP = _UxGT("Temperatura maxima"); LSTR MSG_INFO_PSU = _UxGT("Fuente de aliment"); LSTR MSG_DRIVE_STRENGTH = _UxGT("Fuerza d'o driver"); LSTR MSG_DAC_EEPROM_WRITE = _UxGT("Escri. DAC EEPROM"); LSTR MSG_FILAMENT_CHANGE_OPTION_RESUME = _UxGT("Resumir imp."); // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display // #if LCD_HEIGHT >= 4 // Up to 3 lines allowed LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_3_LINE("Aguardand iniciar", "d'o filamento", "cambear")); LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_3_LINE("Meta o filamento", "y prete lo boton", "pa continar...")); #else // LCD_HEIGHT < 4 // Up to 2 lines allowed LSTR MSG_FILAMENT_CHANGE_INIT = _UxGT(MSG_2_LINE("Aguardand iniciar", "d'o fil. cambear")); LSTR MSG_FILAMENT_CHANGE_INSERT = _UxGT(MSG_2_LINE("Meta o filamento", "y prete lo boton")); #endif // LCD_HEIGHT < 4 LSTR MSG_FILAMENT_CHANGE_UNLOAD = _UxGT(MSG_2_LINE("Aguardando a", "expulsar filament")); LSTR MSG_FILAMENT_CHANGE_LOAD = _UxGT(MSG_2_LINE("Aguardando a", "cargar filamento")); LSTR MSG_FILAMENT_CHANGE_RESUME = _UxGT(MSG_2_LINE("Aguardando impre.", "pa continar")); }